72 XBC-7 Extreme Skid Steer Brush Cutter-3 Blade-DIRECT DRIVE-100% USA MADE

78" DECK (FULL 72 CUTTING WIDTH) HEAVY DUTY "EXTREME BRUSH CUTTER (XBC-7) THIS IS AN ALL AMERICAN MADE PRODUCT, NOT LIKE OTHERS THAT USE CHINESE STEEL, BLADES, HYDRAULICS ETC... AND ONLY ASSEMBLE THEM IN THE U. THIS CUTTER IS MADE IN N.

The XBC-7 features a Dynamic Brand direct drive hydraulic motor. Just hook up the two hydraulic lines (included w/ ½ couplers) and get after it. The XBC-7 extreme cutter is designed for everyday use!

This cutter works great for overgrown fields, shooting lanes, right-of-way maintenance, and land clearing applications. Our customers have reported continually cutting 5-6" hardwoods and up to 10" softwood trees. Featuring a hi-speed Dynamic brand, direct drive hydraulic motor, this cutter is virtually maintenance free!! 100% Made in North Carolina by hard working AMERICANS!!

MASSIVE 5-6 diameter hardwood cutting capacity! Cuts up to 8-10 softwoods.

FULL 6' CUTTING PATH (78 WIDE DECK). Direct Drive Dynamic Hydraulic Motor (no gearbox). Maintenance free oil filled bearing housing. Wide flow range works on 99% of machines (16-26gpm). Built in relief valve protects the motor and your machine.

EXTREME DUTY 6-bolt spindle carrier. Double 3/8 Plate steel blade carrier. 5/8" x 6" AR400 hardened steel blades. 3 blade design with integrated blade balancing. 4,000 psi Parker brand hydraulic hoses.

All bracing has open ends to allow water to pass through. Slotted front guard allows for increased visibility. Slotted HD motor cover allows air flow around the motor for cooling.

Safety steps on both sides of deck. AR400 hardened steel inside runner, ads strength and deck life by reducing wear. Waterproof owners manual tube included (manuals can be downloaded from our site). The pictures above show orange powder coating. You can choose from Orange, Yellow, or default color BLACK.

These brush cutters cannot be unloaded on a lift gate. Will this brush cutter also cut grass and overgrown fields, and how well does it do compared to a 3 point rotary cutter?

Yes, this brush cutter will perform double duty, cutting larges trees and grass/overgrown fields. Many customers tell us they use one side of the bi-directional blades for trees and brush, and the other side for grass/fields.

This method keeps the side used for grass sharper for a longer period of time allowing the cutter to mow fields efficiently. This brush cutter leaves behind a clean cut comparable to that of traditional 3-point rotary cutters. What is a case drain, and do I need one for this cutter?

This cutter does NOT require the use of a case drain line (THE THIRD HOSE)! A case drain is used on radial piston motors to relieve excess pressure within the motor (spits the excess pressure back to tank). Does this brush cutter require high flow hydraulics?

This is a standard flow brush cutter, NOT high flow. This cutter uses one of the widest flow ranges available (16-26 GPM). This flow range covers most of all (99%) skid steers on the market. IF YOU HOOK IT UP TO HIGH-FLOW IT WILL RUPTURE THE GASKETS IN THE MOTOR! Can I sharpen the blades, and how or what method should I use? Yes, the AR400 blades can be sharpened to give extended blade life. To sharpen the blades, you can rotate the blade to the front of the cutter, and swing it out, exposing it from the deck. Then use an angle grinder to re-sharpen. Simply hold the grinder at the same angle that the blade was originally sharpened to.

Where can I get replacement blades, and how much are they? We keep replacement blade kits in stock at all times.

CID (Construction Implements Depot) makes the original and still the best "XBC7" for high-volume CID dealers. I have been a very high volume dealer from our brick and mortar store and not experienced any of these said problems.

I think pushing your vendors around has consequences. The item "72 XBC-7 Extreme Skid Steer Brush Cutter-3 Blade-DIRECT DRIVE-100% USA MADE" is in sale since Tuesday, October 29, 2019. This item is in the category "Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Other Heavy Equipment Attachments". The seller is "idigamerica" and is located in Denton, North Carolina. This item can be shipped to United States.

Model: XBC-7 72
Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: No
Compatible Equipment Make: ASV
MPN: Does Not Apply
Brand: Top Dog Attachments
Compatible Equipment Type: Skid Steer